We purchase diodes for PCBA (SMD) projects:
General Purpose Rectifier
Fast Recovery Rectifier
Ultrafast Recovery Rectifier
High Efficiency Rectifier
Smallsignal Schottky Diode
Smallsignal Switching Diode
We provide services for the Quality Control of electronic components.
We have a laboratory for the Quality Control of electronic components.
We cooperate with other laboratories of the Shenzhen city.
TOWN EL GROUP offers a full range of supplies from China
electronic products industry, electronic components and electronic products.
TOWN EL GROUP supply:
Transient voltage suppressors
Fast recovery rectifiers
Schottky barrier rectifiers
Silicon controlled rectifiers/SCR modules
Industry’s Lowest Phase Noise Frequency Synthesizer
TI’s new LMX2581 wideband frequency synthesizer with integrated VCO outputs delivers the industry’s best phase noise performance. The LMX2581’s low noise PLL and industry’s highest phase detector frequency outperforms the competition to achieve the flexibility of a wideband frequency synthesizer without compromising system performance.
The highly-integrated LMX2581 combines a ?? fractional-N PLL, a multi-core VCO with tank circuit, optional frequency divider, two differential RF output buffers that can deliver +10 dBm single-ended on each side, and several low-noise, high-precision LDOs to enable lower cost systems in a number of applications, including wireless infrastructure, defense and aerospace, radar, test and measurement, and medical imaging.
The LMX2581 is a low noise wideband frequency synthesizer that integrates a delta-sigma fractional N PLL, multiple core VCO, programmable output divider, and two differential output buffers. The VCO frequency range is from 1880 to 3760 MHz and can be sent directly to the output buffers or divided down by even values from 2 to 38. Each buffer is capable of output power from –3 to +12 dBm at 2700 MHz. Integrated low noise LDOs are used for superior noise immunity and consistent performance.
This synthesizer is a highly programmable device and it enables the user to optimize its performance. In fractional mode, the denominator and the modulator order are programmable and can be configured with dithering as well. The user also has the ability to directly specify a VCO core or entirely bypass the internal VCO. Finally, many convenient features are included such as power down, Fastlock, auto mute, and lock detection. All registers can be programmed through a simple 3 wire interface and a read back feature is also available.
The LMX2581 operates on a single 3.3 V supply and comes in a 32 pin 5.0 mm x 5.0 mm WQFN package.
Related end equipment
Cable Modem Termination System
Femto Base Station
Military: Radar/Electronic Warfare
Signal & Waveform Generator
TETRA Base Station
Vector Signal Analyzer
WiMAX & Wireless Infrastructure Equipment
Wireless Data Access Card
Wireless Infrastructure: Heterodyne RX/TX
Wireless Infrastructure: TD-SCDMA RX/TX
Wireless LAN Card
Military: Munitions and Targeting
Point-to-Point Microwave Backhaul
Software Defined Radio (SDR)
Telecom Tower: Remote Radio Unit (RRU)
Vector Signal Generator
Wireless Communications Tester
Wireless Infrastructure: Direct Conversion RX/TX
Wireless Infrastructure: Hi-Perf WiMAX 802.16, 2.5-3.5GHz BTS RX/TX
Wireless Infrastructure: WCDMA & CDMA2000 4/8-Carrier, Receive Diversity RX/TX
Source Texas Instruments
LMX2581 Wideband Frequency Synthesizer with Integrated VCO Datasheet and ordering information
ADM1270 – High Voltage Input Protection Device
The ADM1270 is a current-limiting controller that provides inrush current limiting and overcurrent protection for modular or battery-powered systems. When circuit boards are inserted into a live backplane, discharged supply bypass capacitors draw large transient currents from the backplane power bus as they charge. These transient currents can cause permanent damage to connector pins, as well as dips on the backplane supply that can reset other boards in the system.
The ADM1270 is designed to control the inrush current, when powering on the system, via an external P-channel field effect transistor (FET).
To protect the system from a reverse polarity input supply, there is a provision made to control an additional external P-channel FET. This feature prevents reverse current flow in case of a reverse polarity connection, which can damage the load or the ADM1270.
The ADM1270 is available in a 3 mm 3 mm, 16-lead LFCSP and a 16-lead QSOP.
Battery powered/portable instrumentation
ADM1270 – High Voltage Input Protection Device Datasheet and ordering information
Texas Instruments LM5175 4-Switch Synchronous Buck-Boost Controller
The LM5175 is a synchronous four-switch buck-boost DC/DC controller capable of regulating the output voltage at, above, or below the input voltage. The LM5175 operates over a wide input voltage range of 3.5 V to 42 V (60 V maximum) to support a variety of applications.
The LM5175 employs current-mode control both in buck and boost modes of operation for superior load and line regulation. The switching frequency is programmed by an external resistor and can be synchronized to an external clock signal.
The device also features a programmable soft-start function and offers protection features including cycle-by-cycle current limiting, input undervoltage lockout (UVLO), output overvoltage protection (OVP), and thermal shutdown. In addition, the LM5175 features selectable Continuous Conduction Mode (CCM) or Discontinuous Conduction Mode (DCM) operation, optional average input or output current limiting, optional spread spectrum to reduce peak EMI, and optional hiccup mode protection in sustained overload conditions.
Related end equipment
Automotive Start-Stop Systems
Backup Battery and Supercapacitor Charging
Industrial PC Power Supplies
USB Power Delivery
Source Texas Instruments
Texas Instruments LM5175 Controller Datasheet and ordering information
The new automotive MCUs combine compliance with the most stringent automotive safety standards, encryption for security, and increased memory size for the storage of vital programs and data, strengthening ST’s product line of fault-tolerant microcontrollers for demanding applications throughout the car. These mission-critical applications include engine management, transmission, anti-lock braking, electric power steering, active suspension, and advanced driver assistance systems (ADAS).
“Security and functional safety compliance are essential to realizing cutting-edge high-reliability System-on-Chip ICs for mission-critical automotive applications,” said Fabio Marchio, Group Vice President, General Manager of ST’s Automotive Microcontroller & Infotainment Division. “Offering a simple and compelling upward-migration path from existing parts, our new automotive MCUs enable improved vehicle performance and economy with no compromises in security, while delivering savings in development by promoting hardware and software reuse.”
Part of ST’s Power Architecture™ single-chip 32-bit automotive-MCU family, the SPC58NE product line combines multiple high-performance dual-issue cores with up to 6MB Flash and 768kB internal RAM memory, eight CAN (Controller Area Network) interfaces, and an optimized peripheral set based on the end application. The multiple cores ensure redundancy in these most-important applications to meet the safety and security demands of vehicle manufacturers—and consumers.
The SPC58NE product line is currently available in BGA 292 and LQFP176 package configurations. KGD versions are also planned in the near future. Compliant with the ISO 26262 ASIL-D and EVITA Medium class, the SPC58NE84 is sampling now.
SPC58NE84E7 32-bit Power Architecture MCU for High Performance Applications
SPC58NExx family is the first member of the new SPC58NExx family of 32-bit Flash Automotive MCUs offering a hardware based solution able to answer both ISO26262 ASIL-D compliant and high-performance real-time system requirements for mid/high-end powertrain applications.
32-bit automotive-MCU family, the SPC58NE product line Datasheet and ordering information
800V 1.5A 4-SMD Bridge Rectifiers DIODE DSP
Category: Discrete semi-conductor products
Family: Bridge rectifiers
Diode type: Single phase
Voltage: Peak reverse (Maximum) 800V
Current: DC forward (If) (Maximum) 1.5A
Mounting type: Surface mount
Supplier device package: 4-SDIP
Dynamic catalog: SMT bridge rectifiers
All Wireless and Mobile Device Frequency Standards in one Converter AD9154
Highly integrated AD9154 quad, 16-bit D/A converter delivers 2.4-GSPS bandwidth, enabling superior performance and multi-carrier generation to the Nyquist frequency in baseband mode.
Analog Devices, Inc. (NASDAQ: ADI), a global leader in high-performance semiconductors for signal processing applications, today introduced a quad-channel, 2.4-GSPS, 16-bit D/A converter with industry leading dynamic range performance in the 100- to 300-MHz band for complex IF transmitters. The highly integrated AD9154 quad, 16-bit D/A converter is the only device of its kind to include an on-chip PLL (phase-locked loop) and eight-lane JESD204B interface. The combination of features allows designers to use a single device to meet all of their requirements in multicarrier GSM and LTE transmitters designed for wireless macro base stations, point-to-point microwave radio, military radios and radio test equipment. The new converter includes a range of features optimized for complex IF (intermediate frequency) transmit applications, including complex digital modulation, input-signal power detection, and gain, phase and offset compensation.
Features and Benefits
Supports input data rates up to 1 GSPS
Proprietary, low spurious and distortion design
Single carrier LTE 20 MHz BW, ACLR = 76.7 dBc at 180 MHz IF
Six carrier GSM IMD = 78 dBc, 600 kHz carrier spacing at 180 MHz IF
SFDR = 72 dBc at 180 MHz IF, ?6 dBFS
Flexible 8-lane JESD204B interface
Multiple chip synchronization
Data generator latency compensation
Input signal power detection
High performance, low noise PLL clock multiplier
Digital inverse sinc filter
Digital quadrature modulation using an NCO
“Mix mode” Nyquist Band Selection
Selectable 1?, 2?, 4?, and 8? interpolation filters
Low power: 2.11 W at 1.6 GSPS, full operating conditions
88-lead, exposed pad LFCSP
Source Analoq Devices
Converter AD9154 Datasheet and ordering information
TOWN EL GROUP supply a high voltage film capacitors